Helpful Links for FAQS & The 4 common problems with sprinkler controllers

4 Common Problems with Sprinkler Controllers and How to Fix Them

A residential sprinkler control unit can be a busy homeowner’s best friend . . . until something goes wrong. Then it can become a frustrating nightmare.

Following are four of the most common problems you’ll encounter and simple ways to fix them.

1. The blank display

More than likely, your unit has experienced some kind of electrical service disruption that has caused it to go offline.
Locate the reset button on the controller. This is usually a small inverted button that you can only access with a thin “tool” like the end of a paper clip. Insert your “tool” into the reset slot and press until the display indicates that the controller is back online.

2. The inactive controller

If the system doesn’t seem to be running, check that the controller is set to auto or run. Remember: while scheduled settings may be programmed, they are not activated until the controller is set to auto.
If you see that the controller is set to run, the start time may not have been saved. Turn the controller dial to set watering times. If no time appears, enter a start time as well as starts for each program or zone. Afterwards, confirm that the current day, time and watering days are also correct.

3. The off-schedule watering

If you find that your system is watering at times it shouldn’t, chances are that the manual override key may have been accidentally activated.
The easiest way to clear up this issue is to turn the dial to the off position for a minute or two and then set it back to run. If the problem persists, check the watering start times for an unwanted scheduled time and delete it.

4. The valve failure

When this happens, it’s usually because the run time or watering duration time hasn’t been set. You can remedy this by twisting the controller dial to the desired valve. If the run time is blank, use the up and down buttons to set a duration time.
If, however, you see the alarm light go off or an error message on the controller display, you may be dealing with a valve solenoid issue which may require you to replace the connecting irrigation wire.
Rodriguez Irrigation is here to help homeowners like you make the most of their watering systems. No matter how big or small the issues you may be facing, we have the sales and repair services you need when you need them. Contact us today!

Helpful Links for FAQS

Here we have provided some links for your viewing about conservation (on water), why you need a backflow assembly for your irrigation system or fire sprinklers, why it needs to be tested every year and what is a cross connection. If sprinkler winterizing necessary?

http://www.abpa.org/?page=FAQ

http://www.mercergov.org/Page.asp?NavID=540

https://www.wsscwater.com/customer-service/customer-regulations/cross-connection-control/explaining-cross-connections-bac.html

http://www.precisionlandscape.com/articles/sprinklers/sprinkler-winterizing-necessary

http://www.cityofmarshall.com/reference/refdocs/2192-Cross_Connection_Program_FAQs.pdf

http://www.skywayws.org/conservation.php

http://www.igin.com/article-748-cross-connection.html

http://www.swd16.org/ccc/faq.html